Thread Rating:
  • 0 Vote(s) - 0 Average
DINO BOT U5 MINI MY INSTRUCTIONS
#1
Dinonot u5 mini only  for android 8 
PLEASE READ CAREFULLY BEFORE INSTALLING AS THIS IS DONE AT YOUR OWN RISK
THIS WORKED FOR ME

Update your U5mini to latest firmware back up any settings you need LINES M3u usernames and passwords for IPTV etc.
I used Full update on mine to get a clean build

Once updated check software updates again to see if anything else may be needing updated and if so update again 

Ignore the Linux firmware

Download Zipped file from this link

https://mega.nz/#!y8MxEKKC!lsTUGQDLrn6Mv...QJdA79OqcQ

Connect USB to computer and Format USB to FAT32 copy link still zipped to USB

Insert USB slot and power down

On seeing Boot press ok on remote control

UPDATE should show at front of box if it has worked

Repeat again after powering down properly if it hasn’t 

A circle should show on screen along with line

IMPORTANT WARNING

DO NOT TOUCH ANY BUTTONS ON REMOTE UNTIL ASKED
TIME TAKEN TO UPDATE VARIES FROM 10 MINUTES TO 20

Once updated it is as before to boot to Android or E2

Booting to E2 gives you ATV 6.2 it in German so be careful English option does appear in end 

Remove USB as it causes crashing

Update to 6.3 if you can use online flash new image in settings 

I installed Woosh infinity using Putty on Android phone using the script command

       opkg install http://wbuildx.co.uk/setup.ipk

System crashed a few times but eventually got there in end on E2
REMEMBER THIS GUIDE WORKED FOR ME ON TWO BOXES
DO AT YOUR OWN RISK
I BRICKED MY FIRST BOX BY BEING IMPATIANT but recovered it
Only do this if you have some knowledge
Please excuse any grammar mistakes
Reply }}}
Thanks given by:
#2
(01-21-2020, 10:54 AM)xhamster Wrote: Dinonot u5 mini only  for android 8 
PLEASE READ CAREFULLY BEFORE INSTALLING AS THIS IS DONE AT YOUR OWN RISK
THIS WORKED FOR ME

Update your U5mini to latest firmware back up any settings you need LINES M3u usernames and passwords for IPTV etc.
I used Full update on mine to get a clean build

Once updated check software updates again to see if anything else may be needing updated and if so update again 

Ignore the Linux firmware

Download Zipped file from this link

https://mega.nz/#!y8MxEKKC!lsTUGQDLrn6Mv...QJdA79OqcQ

Connect USB to computer and Format USB to FAT32 copy link still zipped to USB

Insert USB slot and power down

On seeing Boot press ok on remote control

UPDATE should show at front of box if it has worked

Repeat again after powering down properly if it hasn’t 

A circle should show on screen along with line

IMPORTANT WARNING

DO NOT TOUCH ANY BUTTONS ON REMOTE UNTIL ASKED
TIME TAKEN TO UPDATE VARIES FROM 10 MINUTES TO 20

Once updated it is as before to boot to Android or E2

Booting to E2 gives you ATV 6.2 it in German so be careful English option does appear in end 

Remove USB as it causes crashing

Update to 6.3 if you can use online flash new image in settings 

I installed Woosh infinity using Putty on Android phone using the script command

       opkg install http://wbuildx.co.uk/setup.ipk

System crashed a few times but eventually got there in end on E2
REMEMBER THIS GUIDE WORKED FOR ME ON TWO BOXES
DO AT YOUR OWN RISK
I BRICKED MY FIRST BOX BY BEING IMPATIANT but recovered it
Only do this if you have some knowledge
Please excuse any grammar mistakes







Smile
Clean install will give me android 8 with dual boot?
E2 will work again after this update.
Is that correct?
Do I understand it correctly? Smile

Regards
Reply }}}
Thanks given by:
#3
atokstad Yes E2 is working with ATV8 Wrote:
xhamster Wrote:Dinonot u5 mini only  for android 8 
PLEASE READ CAREFULLY BEFORE INSTALLING AS THIS IS DONE AT YOUR OWN RISK
THIS WORKED FOR ME

Update your U5mini to latest firmware back up any settings you need LINES M3u usernames and passwords for IPTV etc.
I used Full update on mine to get a clean build

Once updated check software updates again to see if anything else may be needing updated and if so update again 

Ignore the Linux firmware

Download Zipped file from this link

https://mega.nz/#!y8MxEKKC!lsTUGQDLrn6Mv...QJdA79OqcQ

Connect USB to computer and Format USB to FAT32 copy link still zipped to USB

Insert USB slot and power down

On seeing Boot press ok on remote control

UPDATE should show at front of box if it has worked

Repeat again after powering down properly if it hasn’t 

A circle should show on screen along with line

IMPORTANT WARNING

DO NOT TOUCH ANY BUTTONS ON REMOTE UNTIL ASKED
TIME TAKEN TO UPDATE VARIES FROM 10 MINUTES TO 20

Once updated it is as before to boot to Android or E2

Booting to E2 gives you ATV 6.2 it in German so be careful English option does appear in end 

Remove USB as it causes crashing

Update to 6.3 if you can use online flash new image in settings 

I installed Woosh infinity using Putty on Android phone using the script command

       opkg install http://wbuildx.co.uk/setup.ipk

System crashed a few times but eventually got there in end on E2
REMEMBER THIS GUIDE WORKED FOR ME ON TWO BOXES
DO AT YOUR OWN RISK
I BRICKED MY FIRST BOX BY BEING IMPATIANT but recovered it
Only do this if you have some knowledge
Please excuse any grammar mistakes







Smile
Clean install will give me android 8 with dual boot?
E2 will work again after this update.
Is that correct?
Do I understand it correctly? Smile

Regards
Reply }}}
Thanks given by:


Forum Jump: